Micro Surfacing Emulsion
Bedrock’s desire to go beyond the conventional products and Relentless efforts to meet the customer expectations has led the company to rise as one of the leading manufacturers and supplier of high quality Polymer Modified Bitumen Emulsions used for National Highways and Airport Runways. Bedrock's Micro-surfacing Emulsion is a cost-effective way to treat the surface wheel-rutting problem, and a variety of other road surface problems. It is applied to preserve and shield the underlying pavement structure and to deliver a new driving surface.
Applications
Modified emulsion required for Micro surfacing
Requirement | Specification | Method of test |
Residue of 600 um IS sieve (percent by mass), maximum | 0.05 | IS 8887 |
Viscosity by say bolt furol viscometer, at 250 C, in second | 20-100 | IS 8887 |
Coagulation of emulsion at low temperature | NIL | IS 8887 |
Storage stability after 24 hrs (168 h), % maximum | 2(4) | IS 8887 |
Particle charge | +ve | IS 8887 |
Tests of Residue - | ||
Residue by evaporation, % Maximum | 60 | IS 8887 |
Penetration at 250 C/ 100g/ 5s | 40-100 | IS 1203 |
Ductility at 270c , cm, minimum | 50 | IS 1208 |
Softening point, in degrees C, minimum | 57 | IS 1205 |
Elastic Recovery*, %, minimum | 50 | IS 15462 |
Solubility in tricholoroethylene | 97 | IS 1216 |
Applying Micro Surfacing Emulsion
A calibrated micro surfacing machine is used to produce and place the mixtures in variable thickness as per specification. The rate of application of spray shall be adjusted during the day to suit temperature, surface texture and humidity. System efficiency provides lower cost and reduced delays to motorists.
How Bedrock Microsurfacing Benefits?
- Increase skid resistance, colour contrast, surface restoration, and service life to high-speed, heavy-traffic roadways
- Does not alter drainage; there’s no loss of curb reveal
- Creates a new, stable surface that is resistant to rutting and shoving in summer and to cracking in winter
- Restores the skid resistant surface to a slick bridge decking with minimum added dead weight.
- Cost-effective resurfacing, Environmentally safe, emitting no pollutants.
- Micro Surfacing’s life expectancy usually exceeds five years; Eliminates hydroplaning problems that occur during periods of rain
Different types of Micro surfacing (IRC : SP : 81- 2008)
Item | Type II ( 4 to 6 mm)** | Type III ( 6 to 8 mm )** |
Application | For roads in urban and rural areas, residential streets, as preventive and renewal treatment (<1500 CVPD) | For primary and inter-state routes, highway and runways to give maximum skid resistance, preventive and renewal treatment. (1500 to 4500 CVPD) |
Quantity of Mix* (Kg/m2) | 8.4 to 10.8 | 11.1 to 16.3 |
Residual Binder ( percentage by weight to dry aggregate) | 6.5 to 10.5 | 5.5 to 10.5 |
Testimonials
Clients
Raj Path Infracon Pvt Ltd. created a World Record by constructing a single lane 39.691 KMs long stretch of road in 24 hours. Our world record has been noted by Limca Book Of Records. This remarkable feat was successful because of your valuable and timely support.RAJ PATH INFRACON PVT.LTD.
We used Bitumen Emulsion RS1 and SS1 Manufactured by Bedrock Chem infra LLP for our following Projects - Lonikand , Digras Darhwa, Warangal, Vellore, Akot - Akola We wish to confirm that product quality is good and upto the mark. Thanks & RegardsPATIL CONSTRUCTION & INFRASTRUCTURE LTD.
We used Bedrock Chem Infra LLP - (WADA Maharashtra) Road Emulsion RS1 for our M/s. Malegaon Manmad Kopargaon Toll Road Pvt. Ltd. project. The Product and Quality of the material found satisfactory.VISHVARAJ INFRASTRUCTURE LTD.
We used Bedrock Chem Infra LLP - (WADA Maharashtra) Road Emulsion SS1 and RS1 for our Dhule, Sakari & Navapur Road project. The Product and Quality of the material found satisfactory. We wish you for good wishes in the future. Yours sincerely,GHV(INDIA) PRIVATE LIMITED
SUCCESS INDICATORS
3
Certifications
200
Clients
85
% Retention
Trusted Partner for Road construction
We are an ISO 9001:2015 and ISO 45001:2017 certified company deployed with highly qualified engineers and chemists. Our products carry the prestigious BIS certificate
UPDATES
LATEST POSTS
The importance of signboards in national highways and rural pathways?
Traffic signboards are very important for the safety of road…
Why pay attention to periodical maintenance?
Roads are the foremost transportation medium and comprise a lion’s…
How modern construction technology shape the lives of travellers and pedestrians?
India has the second largest network of roads in the…
Get in Touch
Contact us
Bedrock - The Leading Micro surfacing Emulsion Supplier in Mumbai, Maharashtra
Micro-surfacing emulsion is a polymer-modified asphalt emulsion. It is quick to set, dense-graded, and aggregate in nature. Usually used in semi-liquid form along with paving machine. This is always used with a specialized mixing of water and mineral fillers. Micro-surfacing emulsion dealers provide the best micro surfacing emulsion for construction applications. The application of micro-surfacing emulsion in the construction of roads is diverse. It is used for a wide range of road problems on streets, highways, and airways. The perfect blend of high-quality materials, advanced polymers, and additives make it a solution for wheel rutting, reformation of roads, and so on.
Micro-surfacing emulsion manufacturers in Maharashtra provide an adequate quantity of micro-surfacing emulsions for various requirements in road construction. Micro-surfacing emulsion manufacturing company engages in the production of paving material, micro surfacing emulsion. It is a thin surface treatment used for road maintenance.
The factors that influence micro surfacing emulsion
Micro-surfacing emulsion manufacturers are keen on producing micro surfacing emulsions of high quality and accurate proportion. A number of factors are used for the manufacturing market’s best paving material. These components are analyzed and assessed for great performance and increased durability. Traffic, Aggregate Existing surface, and Compatibility
The components of Micro-surfacing Emulsion
These are the components used by micro surfacing emulsion dealers for manufacturing micro surfacing emulsion: Asphalt emulsion, Mix aggregate, Mineral fillers, and Water.
The eco-friendly surface treatment material manufactured by Micro-surfacing emulsion manufacturing company provides great strength for the road. It is applied on a sturdy pavement surface that has an aggregate loss, cracks, and a high degree of oxidation. Generally, the mix of polymer modified asphalt emulsion is of two types, depending upon the thickness and aggregate mix – (Type I) 4 mm to 6 mm thick and (Type III) 6 mm to 8 mm thick
Aggregate grading is of importance and micro surfacing emulsion suppliers take care of it. Bedrock, among the best, assures the aggregate is hard, hard, and cleaned and has no deleterious substances such as soft pieces. When applied chemical additives are used for getting a smooth surface finishing.
Bedrock is one of the leading micro surfacing emulsion manufacturers in Maharashtra, who are adept at creating exact micro surfacing emulsions for constructing roads. We employ a specialized paving instrument, calibrated micro surfacing machine for applying the mixture in various places in different thicknesses. Such a system efficiency ensures cost-effectiveness and fast dryness. The sprayer is used to determining humidity, the day temperature, and the existing pavement structure.
Our team comprises qualified engineers and knowledgeable staff for executing the calibration and application of micro-surfacing emulsion. Being one of the efficient micro surfacing emulsion suppliers, Bedrock ensures the calibration is perfect and complete for great results.
Why choose micro surfacing emulsion manufacturers?
We are one of the renowned micro surfacing emulsion manufacturers in Maharashtra that provides a proven solution for resurfacing for roads and it saves a lot of money when compared to hot mix surface treatment. Besides, it proves to be useful as it can be applied to an existing pavement structure. Even, if it has patches.
Micro-surfacing emulsion suppliers provide micro-surfacing emulsion; applying which you get a smooth paving surface. It is good for occasional road maintenance and offers less downtime. In other words, the application will not be a hindrance to drainage and existing roads. Roads can be used by pedestrians and drivers within two hours. No control of traffic required. Lastly, the process is simple as the mixing and paving take place simultaneously.
Bedrock is one of the best micro surfacing emulsion suppliers in Maharashtra. We are dedicated to providing the market’s best micro surfacing emulsion for construction purposes. Our excellent team makes sure the design, testing, quality check, and procedure of construction are standardized for achieving the intended specifications.
The applications of Micro-surfacing Emulsion
For roads as wearing course of protection an smooth finish, Airfields to increase skid resistance, For wheel ruts up to 38 mm, Asphalt and portland cement surfaces for all weather conditions, Heavy traffic intersections, For eliminating hydroplaning,
We are one of the leading micro surfacing emulsion suppliers and employing our micro surfacing emulsion mix provides these advantages: Cost-effective resurfacing for roads, Eco-friendly application, Less downtime, No hindrance for traffic and drainage, Smooth finishing, Stable surface, Restore skid resistance.
